To Offset a Face of a Solid by a Keyed-In Distance
-
Select the Extend Face Feature tool.
-
Turn on Distance and in the adjacent field, type the required distance.
-
Turn on Offset Face.
- (Optional)
Turn on Show Original Face Position.
-
Select the solid.
-
Select the face to be extended.
- (Optional)
Using <ctrl+data point>, select further faces to be extended.
-
Accept to view the extended face.
-
Accept to complete the construction.
Left: Select the solid (1) and the face to extend (2). | Right: Accept (3) to view the extension and again (4) to complete.
