| Enable AccuSnap |
If on (default), AccuSnap is automatically enabled. When using AccuSnap in conjunction with AccuDraw, you can use the following AccuDraw shortcuts:
- HU — suspends AccuSnap for the current tool operation. Selecting a new tool or entering a Reset re-enables AccuSnap.
- HS — turns AccuSnap off or on.
ACCUSNAP
<
OFF |
ON |
SUSPEND |
TOGGLE
>
Note: You can also turn AccuSnap on or off from the Snaps ribbon group, by clicking the AccuSnap icon  .
|
| Show Tentative Hint |
If on (default), and the pointer is within the range of the Snap Tolerance, AccuSnap displays the nearest snap point with a cross-hair. |
| Display Snap Icon |
If on (default), AccuSnap displays the icon of the current snap mode at the snap point. |
| Update Statusbar Coordinates |
If on, the coordinate readout in the status bar updates for each tentative snap point. That is, each time that AccuSnap snaps to a point on an element, or when you click the tentative point button, the coordinates for the snap point appear in the status bar. |
| Play Sound on Snap |
If on, a sound is played when you snap to an element. |
| Hilite Active Element |
If on, AccuSnap highlights the active element as soon as the pointer is within the range of the Snap Tolerance. If off, AccuSnap highlights the active element only when a tentative snap point is displayed.
|
| Identify Elements Automatically |
If on, elements are identified automatically, as you pass the pointer over them.
ACCUSNAP
AUTOLOCATE
<
OFF |
ON |
TOGGLE
>
|
| Enable For Fence Create |
If on, AccuSnap is active when placing a fence. |
| Pop-up Info |
If on, and you pause the pointer over a highlighted element, a pop-up displays information about the element. An option menu lets you define when this information appears.
- Automatic — Pop-up information appears whenever you pause the pointer over a highlighted element.
- Tentative — Pop-up information appears only when you manually snap a tentative point to an element and then hold the pointer over any part of the highlighted element.
|
