Torus Surface

(3D only) Used to place a torus surface (a donut-shaped surface).

You can access this tool from the following:

Setting	Description
Axis	Sets the direction of the axis of revolution. Points — Direction of axis is defined graphically. AccuDraw can be used to define the drawing plane on which the points are placed. Screen X, Y, or Z — Direction of the axis is set to the screen's X, Y, or Z axis. Drawing X, Y, or Z — Direction of the axis is set to the drawing's, or design file's, X, Y, or Z axis.
Primary Radius	If on, sets the primary radius (the one the torus' profile is swept around).
Secondary Radius	If on, sets the secondary radius (the radius of the torus' profile).
Angle	If on, sets the sweep angle.

Key-in: PLACE TORUSSURF