Mirror Feature

Used to mirror a feature of a parametric element , or create a mirrored copy of the feature, about a defined axis.

You can access this tool from the following:

Setting	Description
Mirror Along	Sets the direction and the coordinate system along which the feature is mirrored. Design X — The active DGN file X axis. Design Y — The active DGN file Y axis. Design Z — The active DGN file Z axis. View X — The Active view X axis. View Y — The Active view Y axis. View Z — The Active view Z axis. Accudraw/ACS X — The active Auxiliary Coordinate System X axis. Disabled if no ACS present. Accudraw/ACS Y — The active Auxiliary Coordinate System Y axis. Disabled if no ACS present. Accudraw/ACS Z — The active Auxiliary Coordinate System Z axis. Disabled if no ACS present.
Mirror	Original - Mirrors the original element without making any copies. Separate Copy- makes a separate copy which is independent of any modification on the original. Associative Copy - makes an associative copy which shows the same effect of any modification on the original.

Setting

Description

Mirror Along

Sets the direction and the coordinate system along which the feature is mirrored.

Design X — The active DGN file X axis.
Design Y — The active DGN file Y axis.
Design Z — The active DGN file Z axis.
View X — The Active view X axis.
View Y — The Active view Y axis.
View Z — The Active view Z axis.
Accudraw/ACS X — The active Auxiliary Coordinate System X axis. Disabled if no ACS present.
Accudraw/ACS Y — The active Auxiliary Coordinate System Y axis. Disabled if no ACS present.
Accudraw/ACS Z — The active Auxiliary Coordinate System Z axis. Disabled if no ACS present.

Mirror

Original - Mirrors the original element without making any copies.
Separate Copy- makes a separate copy which is independent of any modification on the original.
Associative Copy - makes an associative copy which shows the same effect of any modification on the original.

Key-in: XFEATURE MIRROR COPYOPTIONS