| Array Type
|
Sets the type of array.
- Rectangular —
Creates a rectangular array.
- Polar — Creates a
polar (circular) array.
- Along Path — Creates
an array of a feature along a path.
|
| Array About
|
Sets the coordinate system about which the array is
generated.
- Feature — The
features axes.
- Design X — The
active DGN file X axis.
- Design Y — The
active DGN file Y axis.
- Design Z — The
active DGN file Z axis.
- View X — The Active
view X axis.
- View Y — The Active
view Y axis.
- View Z — The Active
view Z axis.
- Accudraw/ACS X —
The active Auxiliary Coordinate System X axis. Disabled if no ACS present.
- Accudraw/ACS Y —
The active Auxiliary Coordinate System Y axis. Disabled if no ACS present.
- Accudraw/ACS Z —
The active Auxiliary Coordinate System Z axis. Disabled if no ACS present.
|
| Along Path Mode
|
(Available only when
Array Type is set to
Along Path) Sets the mode for placement of
feature along a path. Options are:
- Number - Defines the
number of features in the array, via the
Copies setting.
- Distance - Defines
the distance between features in the array, via the
Distance setting.
- Both - Defines the
number of features in the array and the distance between each feature, via the
Copies and
Distance settings respectively.
|
| Copies
|
(Available only when
Along Path Mode is set to
Number or
Both) Sets the number of copies of the
feature in the array, including the original.
|
| Distance
|
(Available only when
Along Path Mode is set to
Distance or
Both) Sets the distance between features in
the array.
|
| Angle (Rectangular array)
|
If on, sets the angle (positive or negative) of the
array relative to the x-axis of the selected coordinate system.
|
| Rows (Rectangular array)
|
Sets the number or rows.
|
| Columns (Rectangular array)
|
Sets the number of columns.
|
| Row Spacing (Rectangular array)
|
Sets the distance between the rows (can be positive
or negative).
|
| Column Spacing (Rectangular array)
|
Sets the distance between the columns (can be
positive or negative).
|
| Items (Polar array)
|
Sets the number of items that will form the array.
|
| Delta Angle (Polar array)
|
Sets the angle between arrayed items.
|
| Total Angle (Polar array)
|
Sets the total angle by the polar array set.
|
| Rotate
|
(Available only when
Array Type is set to
Along Path) If on, the element(s) are
rotated to maintain their relative orientation to the path element.
|
| Whole Element
|
Creates an array of the whole feature, including the
boolean operations or modifications applied to the solid. For example, if you
unite three solids using the
Unite Solids tool, and then try to create an
array with this check box turned on, the array is created for the united
feature. On the other hand, if this check box is off, the array is created only
for the selected solid.
|
Used to
construct an array of a parametric feature. Arrays can be rectangular,
polar (circular), or along a selected path.
