Rectangular - Duct Fittings
|
AngleThroatTee Default
`
|
Angle Throat Tee — An angle
throat tee advantages branching out flow in a desired angle in ductwork.
|
DropCheekCross Default
`
|
Drop Cheek Cross — A cross
fitting that moves in both the horizontal and vertical planes at the same time.
|
DropCheekTee Default
`
|
Drop Cheek Tee — A tee fitting
|
DropCheekWye Default
`
|
Drop Cheek Wye — A Wye fitting
|
SquareThroatTee "Default"
|
Square Throat Tee — A square
throat tee advantages branching out flow in a desired angle in rectangular
ductwork.
|
RectAdapter Default
|
Rectangular Adapter — Used to
line up with the duct extension.
|
RectangularCap Default
|
Rectangular Cap — Cap can have
a handle when the Cap Type property is set to 1.
|
RectangularElbow DefaultRect
|
Rectangular Elbow —
Rectangular Elbow Radius elbow that connects two rectangular ducts in a given
angle. The auto-fitting option connects the ducts when the run is deviated in
an angle. The custom defined vanes inside the elbow controls the air flow.
|
RectangularElbow Mitered
|
Rectangular Elbow Mitered —
Joining of two equal duct segments in an angle forms a mitered elbow. A true
miter bend is a 90 degree bend made by cutting two pieces at 45° and joining
together.
|
RectangularElbow RadiusThroatSquareHeel
|
Radius Throat Square Heel
Elbow — Square heel elbows with radius throat fittings are best suited in
rectangle turns.
|
RectangularElbow SquareThroatRadiusHeel
|
Square Throat Radius Heel
Elbow — Radius heel elbows with square throat.
Use of square throat elbows and tees in
ductwork promote a more uniform airflow and reduced turbulence, when associated
with turning vanes . The square throat tee eases branching out flow in a
desired angle in rectangular duct routing.
|
RectangularTee Default
|
Rectangular Tee — Rectangular
duct splitter tee to connect a main duct with two branches of duct in angle.
|
RadiusThroatCross "Radius Throat Cross"
|
Radius Throat Cross — A radius
throat cross fitting facilitates connecting two straight ducts at their
intersection keeping the dusts in same plane. The radius at each branch
controls the angular displacement of the cross ends.
|
RadiusThroatSquareHeelCross Default
`
|
Radius Throat Square Heel
Cross —
|
SquareThroatCross "Square Throat Cross"
|
Square Throat Cross — A square
throat cross fitting facilitates connecting two straight ducts at their
intersection keeping the duct segments in same plane. In place of ducts, the
ends may have one or more terminal equipments connected in the route.
|
SquareHeelWye Default
`
|
Square Heel Wye —
|
RectangularTransition "Centric Reducer"
|
Rectangular Transition —
Allows for a change in duct size to meet air flow requirements of the system,
or to adapt to existing duct of a different size.
|
RectangularWye Default
|
Rectangular Wye — A
rectangular fitting that connects the main segment duct with two branches of
rectangular ducts. Either or both the branch angles can be set to 90° or less.
The radius of branches manage the curved segments.
|
RectBreech Breech
|
Rectangular Breech — A 3 way
rectangular fitting that connects the main segment duct with two branches of
rectangular ducts. Either or both the branch angles can be set to 90 degrees or
less.
|
RectCoupling Default
|
Rectangular Coupling — Couples
up two straight ducts. Economical over elbow
|
RectFlexConnection Default
|
Rectangular Flex Connection —
This component acts as a vibration isolation fitting.
|
RectNestedTee "Rectangular Nested Tee"
|
Nested Fitting — A nested tee
fitting provides connecting capability of connecting a duct to multiple
rectangular branches and terminal equipments.
A two piece branch fitting is commonly used in the
industry.
|
SideBranch "Rectangular Side Branch"
|
Rectangular Side Branch —
Rectangular duct side branch fitting provided with an end connection to connect
duct segment branched out in an angle.
|
ThreeWayTee "Three Way Tee"
|
Rectangular Cross — A three
way tee fitting that incorporates a straight reducer and two side angular
branches to connect rectangular duct segments.
|
RectRndTransition RectToRnd
|
Transition Rectangular To
Round — Allows connecting a rectangular duct to a round duct in the straight
path of duct flow.
|
RectangularTakeoff Angled
|
Rectangular Angled Takeoff —
Angled takeoff routes can be connected with fitting having rectangular inlets.
|
RectangularTakeoffRadius "Radius 1"
|
Rectangular Takeoff Radius 1
— The angular curvature of the side of the branch is controlled with the value
of primary radius.
|
RectangularTakeoffRadius "Radius 2"
|
Rectangular Takeoff Radius 2 —
Additionally, the secondary radius defines the curvature of another side of the
branch.
|
RectangularTakeoffRadius "Radius 3"
|
Rectangular Takeoff Radius 3 —
Both radius values define the curvature of sides of branch.
|
RectOgee Ogee
|
Rectangular Ogee — Ogee
provides a way to connect offset duct routes. This fitting is not catalog
driven as these types of offsets usually require a fabricated piece.
|
RectOvalTap "Oval Tap"
|
Oval Tap On Rectangular Duct
— Used for transition from rectangular duct to oval pipe or insulated flexible
duct. Adjustable inclined angle. Forms a transition from rectangular to oval
branch duct.
|
RectOvalTransition RectToOval
|
Transition Rectangular To Oval
— Allows connecting a rectangular duct to an oval ductwork or stack .
|
RectOvlTakeoff RectToOvl
|
Takeoff Rectangular To Oval —
Useful where small portion of the flow needs to be diverted in the oval branch
duct.
|
RectRectTap "Rect Tap"
|
Rectangular Tap — The outlet
of the tap connects to the rectangular branch duct for down streaming of the
air.
|
RectRndTakeoff RectToRnd
|
Takeoff Rectangular To Round
— Allows fitting to be mounted to Rectangular duct with improved air flow. Used
for transition from air plenums or rectangular duct to round pipe or insulated
duct.
|
RectRoundTap "Round Tap"
|
Round Tap On Rectangular Duct
— Used for transition from rectangular duct to round pipe or insulated flexible
duct. Adjustable inclined angle. Useful when branch ducts are to be located
within a joist space.
|
Trouser Trouser
|
Rectangular Trouser — The
trouser fitting branches out two end segments spaced apart with an offset
value. Each straight branch used to connects to a rectangular duct.
|
TapableEndCapRectangular Default
|
Tappable End Cap Rectangular —
A tappable end cap fitting that allows to connect the rectangular shape
connection after the end cap.
|
TapableEndCapRectToRound Default
|
Tappable End Cap Rectangular
to Round — A tappable end cap fitting that allows to connect the round shape
connection after the end cap.
|
TapableEndCapRectToOval Default
|
Tappable End Cap Rectangular
to Oval — A tappable end cap fitting that allows to connect the oval shape
connection after the end cap.
|
RectangularZElbow Default
|
Rectangular Z Elbow — A
Z-Shaped elbow used in Duct Sizing (ASHRAE fitting number CR3-17)
|
CompoundOffsetElbow Default
|
Rectangular Offset Elbow — A
combined 90° Elbows Lying in Different Planes (ASHRAE fitting number CR3-18)
|
VariableAngleWye Default `
|
Variable Angle Wye — A
fitting with flexibility of setting varying angle at both top and bottom branch
of wye.
|
Access Doors
|
BMV_RectangularFlatAccessDoor "Flat Panel" Default
|
Access Door - Flat Panel —
The moderate sheet thickness panel fits on a surface of rectangular duct. The
door can be set hinged or with cam.
|
BMV_RectangularStdAccessDoor "Standard Rectangular"
Default
|
Access Door - Standard
Rectangular — The thickness adds strength to the panel, give way to a standard
rectangular access door suitable to fit on rectangular ducts. The door can be
set hinged or with cam.
|
BMV_RectOvalAccessDoor "Flat Oval" Default
|
Access Door - Rectangular Flat
Oval — The oval shape flat panel gives smooth edge advantage over cornered
door. Flat oval design optimizes access area and simplifies installation.
Attachment available as hinged or with cam.
|
Flat Panel" Default
|
Access Door - Radius Flat
Panel — The moderate sheet thickness roll-formed door pane fits on a surface of
round duct. The door can be set hinged or with cam.
|
"Radius Flat Oval" Default
|
Access Door - Radius Flat Oval
— Flat oval access panel provide easy access into air ducts and units. The
thickness adds strength to the panel, give way to a oval access door suitable
to fit on round ducts. The door can be set hinged or with cam.
|
"Radius Pressure Relief" Default
|
Access Door - Radius Pressure
Relief — Pressure relief access doors are designed for use in low to medium
pressure duct systems. They provide a means of gaining access to damper
components inside the ductwork. Assures a tight seal without obstruction in the
air system.
Attachment available as hinged or with cam.
|
BMV_OvalAccessDoor "Flat Panel" Default
|
Access Door - Oval Flat Panel —
The moderate sheet thickness rectangular door pane fits on a surface of oval
duct. The door can be set hinged or with cam.
|
BMV_OvalAccessDoor "Standard Rectangular" Default
|
Access Door - Oval Standard
Rectangular — Flat rectangular access panel provide easy access into air ducts
and units. The thickness adds strength to the panel, give way to an access door
suitable to fit on oval ducts. The door can be set hinged or with cam.
|
BMV_OvalAccessDoor "Flat Oval" Default
|
Access Door - Oval Flat Oval —
Oval access doors are designed for use in low to medium pressure duct systems.
They provide a means of gaining access to damper components inside the
ductwork. Assures a tight seal without obstruction in the air system.
Attachment available as hinged or with cam.
|
Round - Duct Fittings
|
RndOvlTakeoff RndToOvl
|
Takeoff Round To Oval — Takeoff
branching an oval outlet on the wall of round duct.
|
RndRectTakeoff RndToRect
|
Takeoff Round To Rectangular —
Rectangular takeoff branching straight on the wall of round duct, used to
connect fittings in the air handling system.
|
RndTakeoff Conical
|
Round Conical Takeoff — Round
conical outlet branched out perpendicular to the wall of round duct. The outlet
diameter determines the reducing effect in the conical branch, thereby maintain
the flow of different pressure conditions. Suitable for connecting HVAC
equipments, like VAV in the round and rectangular duct routes.
|
RndTakeoff Default
|
Round Takeoff — Round takeoff
branching straight on the wall of round duct.
|
SaddleTap Tap
|
Saddle Tap/TakeOff — Saddle
Take Off useful for remodeling. Used for starting branch duct runs from round
pipe trunk or branch lines in HVAC air duct systems.
|
SaddleCross "Saddle Cross"
|
Saddle Cross — A 4-way
fittings having saddle reducer branches used to interconnect pipes and
fittings.
|
SaddleTee "Saddle Tee"
|
Saddle Tee — A snap tee, used
to quickly add on existing duct to connect a branched outlet.
|
SegmentedBend "Segmented Bend"
|
Segmented Bend — Segmented
elbows provide more flexibility when routing round duct systems.
|
SegmentedBend2 "Segmented Bend End Segment"
|
Segmented Bend End Segment —
Placing Segmented Bend End Segment elbows with an offset between its outlets
eliminates the need to use a combination of fittings when routing through tight
spaces. Segmented Bend End Segment elbow connects two offset ducts. For
example, set the value of "Offset" property to alter elbow's second outlet is
offset accordingly.
|
RoundAdapter Default
|
Round Adapter — Used to extend
ductwork by connecting round ducts in a line.
|
RoundBreech "Round Breech"
|
Round Breech — A 3 way round
breech connects the main segment duct with two branches of round ducts in the
angle 90° or less.
|
RoundCap Default
|
Round Cap — Cap fitting used
to cover up the duct terminal. It can have a handle when the Cap Type property
is set to 1.
|
RoundCoupling Default
|
Round Coupling — Coupling
connects two round ducts laid in a straight line. Advantageous over elbows.
|
RoundElbow DefaultRound
|
Round Elbow — A radius elbow
for connecting round ducts in an angle. Suitable in installation of duct-out
hoods.
|
RoundElbowMitre "Mitre Elbow"
|
Round Elbow Mitre — Curved
elbow formed by connecting separate sections called gores formed by defining
the Number of Mitres property that in turn controls angle of each segment.
|
RoundFlexConnection Default
|
Round Flex Connection — This
component acts as a vibration isolation fitting.
|
RoundReducerCross ReducerCross
|
Round Reducer Cross — Cross
reducer fitting with smaller outlet diameter and two side branches inclined as
per values set to cone angle.
|
RoundThreeWay "Three Way"
|
Round Three Way Wye — A round
fitting with one inlet and two branch outlets of uniform size placed at default
45° to inlet. Though, the angles can be manipulated per requirement of flow.
|
RoundTransition "Centric Reducer"
|
Round Transition — Round
transition allows connecting a round duct run to another duct of different
diameter.
|
RoundTrouser "Round Trouser"
|
Round Trouser — Round trouser
fitting branch out two end segments spaced apart with an offset value. Each end
is used to connect to round duct .
|
RoundWye "Round Wye"
|
Round Wye — These "Y" shaped
ducting components transition from one round duct into two round ducts.
|
RoundOvalTap "Oval Tap"
|
Oval Tap on Round Duct — Oval
tap outlet branched out in an inclined angle on the wall of round duct.
|
RoundRectTap "Rect Tap"
|
Rectangular Tap on Round Duct
— Rectangular takeoff branching out in an inclined angle on the wall of round
duct.
|
RoundRoundTap "Round Tap"
|
Round Tap — Round tap outlet
branched out in an inclined angle on the wall of round duct.
|
RoundTee RoundTee
|
Round Tee — Tee branches out
an end connection to connect to a round duct.
|
RoundCross RoundCross
|
Round Cross — A 4-way fittings
having one inlet and three outlets, and the branch line passes completely
through a tee. The angle values set branch inclination.
|
RoundOffset Default
|
Round Offset — The round
offset allows connecting two parallel ducts or duct and duct fittings in a
large ductwork and routes. The round offset adds duct transition and aids in
connecting two parallel ducts or duct and duct fittings with a desired rise
value set.
|
ConicalTee "Conical Tee"
|
Conical Tee — Reducing airflow
tee fitting in round ductwork.
|
CrossOver Default
|
Crossover — Universal
crossover pipe fitting with a smooth bend to cross over a duct line.
|
CrossOverCloseRough CloseRough
|
Crossover Close Rough — Rough
crossovers ideal to route around rectangular ducts.
|
Oval - Duct Fittings
|
OvalElbow DefaultOval
|
Oval Elbow — The angular elbow
fitting formed with number of segments connecting in a defined angle.
|
OvalTee OvalTee
|
Oval Tee — Flat oval trouser
fitting branch out two end segments spaced apart with values defined for top
and right offsets.
|
OvalWye "Oval Wye"
|
Oval Wye — Flat Oval Wye
fitting with lateral cross, branched in a given angle.
|
OvalTrouser "Oval Trouser"
|
Oval Trouser — Flat oval
trouser fitting with lateral branch.
|
OvalCap Default
|
Oval Cap — Cap fitting used to
cover up and close the duct terminal. It can have a handle when the Cap Type
property is set to 1.
|
OvalAdapter Default
|
Oval Adapter Default — Used to
extend ductwork by connecting oval ducts in a line.
|
OvalCoupling Default
|
Oval Coupling — Coupling
connects two oval ducts laid in a straight line. Advantageous over elbows.
|
OvalCross "Oval Cross"
|
Oval Cross — A three way oval
cross fitting that incorporates a straight reducer and two side angular
branches to connect oval duct segments.
|
OvalFlexConnection Default
|
Oval Flex Connection — This
component acts as a vibration isolation fitting.
|
OvalOffset Default
|
Oval Offset — The oval offset
allows connecting two parallel ducts or duct and duct fittings in a large
ductwork and routes. The oval offset adds transition and aids in connecting two
parallel ducts or duct and duct fittings with a desired rise value set.
|
OvlRectTakeoff OvlToRect
|
Takeoff Oval Duct To
Rectangular Branch — Rectangular takeoff branching straight on the wall of oval
duct, used to connect fittings in the air handling system having rectangular
inlets
|
OvlRndTakeoff OvlToRnd
|
Takeoff Oval Duct To Round —
Round takeoff branching straight on the wall of oval duct, used to connect
fittings having round inlets.
|
OvlTakeoff Default
|
Oval Takeoff — Oval takeoff
branching straight on the wall of oval duct.
|
OvalRectTap "Rect Tap"
|
Rectangular Tap on Oval Duct —
Rectangular tap outlet branched out in an inclined angle on the wall of oval
duct.
|
OvalRoundTap "Round Tap"
|
Round Tap on Oval Duct — Round
takeoff branching out in an inclined angle on the wall of oval duct.
|
OvalOvalTap "Oval Tap"
|
Oval Tap — Oval tap outlet
branched out in an inclined angle on the wall of oval duct.
|
OvalReducerCross ReducerCross
|
Oval Reducer Cross — Flat Oval
Wye fitting with two branched conical cross.
|
OvalTransition "Centric Reducer"
|
Oval Transition — Oval
transition allows connecting an oval duct run to another duct of different duct
size.
|
OvlRndTransition "Oval Round"
|
Transition Oval To Round —
Oval to round transition allows connecting an oval duct run to a round duct of
different duct size.
|