Angle |
Positive <angle value>
- Sets angle between wye side branches.
|
Branch | Connection Length |
Positive <numeric value>
- Sets the straight length at End3.
- Sets length of threaded portion at End3.
|
Branch | Outer Diameter |
Positive <numeric value>
- Side branch (End3) outside diameter.
|
Branch Radius |
Positive <numeric value>
- Sets center line radii for wye side branches.
|
Center to Inlet Distance |
Positive <numeric value>
- Sets distance between the End1 connect point and End2 center line.
|
Center to Branch Distance |
Positive <numeric value>
- Sets distance between main branch center line (End1 and End2) and side branch's (End3) male connection.
|
Center to Inlet Distance |
Positive <numeric value>
- Sets distance between End1 connect point and End2 center line.
|
Connection | End Type |
fl -<numeric value>
- Sets and sizes end with a flange connection.
m -<numeric value>
- Sets and sizes end with a male connection.
fe -<numeric value>
- Sets and sizes end with a female connection.
Separate End Type entries for each End Spec with a semi colon. Example: fl-2;fe-.13 creates a flange at End1 with size 2, and a female connection at End2 with an overall reduction of component's dimensions of .13
|
Inlet | Length |
Positive <numeric value>
- Sets the straight length at End1.
- Sets length of threaded portion at End1.
|
Inlet | Outer Diameter |
Positive <numeric value>
|
Length (L) |
Positive <numeric value>
- Sets distance between the End1 and End3 connect points.
|
Outlet | Length |
Positive <numeric value>
- Sets the straight length at End2.
- Sets length of threaded portion at EndSpec2.
|
Outlet | Outer Diameter Outlet 1 | Outer Diameter |
Positive <numeric value>
- Reduced branch outside diameter.
|
Standard Angle |
<angle value> between 5° and 90°
- Closest catalog match for angle property. Set by Manufacturer Catalogs.
|
Total Length |
Positive <numeric value>
- Sets overall length of fitting.
|