To Change the Assignments from the Default to Your Preferred Configuration
- You must first assign the buttons in the Wintab dialog and then in OpenBuildings™ Station Designer.
- Start the Bentley Tablet Driver.
- Select Configure Mouse Emulator.
- Select Configure Buttons.
- Click Button #1 in the Physical Button list box.
- Click Application defined function in the Action list box.
- Click Button #3 in the Physical Button list box.
-
Click Application defined function in the Action list box.
A Bentley "B" precedes each line in the Physical Button list box.
- Click Button #2 in the Physical Button list box.
- Click Left-click in the Action list box.
- Click Button #5 in the Physical Button list box.
-
Click Right-click in the Action list box .
There should not be a Bentley "B" on the lines for buttons number 2 and 5.
- Click OK in the Wintab Button Configure dialog.
- Turn on Save as default in the Configure Tablet Context dialog.
- Click OK in the Configure Tablet Context dialog.
- Click OK on Bentley Tablet Driver dialog.
- Start the Bentley Tablet Driver.
-
Click Close on Bentley Tablet Driver dialog.
You have successfully changed the Right-click and Left-click events from buttons 1 and 3 to 2 and 5.
- Start OpenBuildings™ Station Designer.
-
Select
.
The Button Assignments dialog opens.
- Click Default.
- Select Tentative from the list box.
- Press button #8 on the puck when the cursor is in the Button Definition Area .
- Select Command.
-
Press button #11 on the puck when the cursor is in the Button Definition Area.
Due to the large variety of tablets, pucks, and drivers combinations OpenBuildings™ Station Designer does not attempt to display the actual button number. OpenBuildings™ Station Designer will display a synthesized button number in the Invoked by column.
- Repeat steps 23 and 24 for each button and function pair that you wish to set and click OK when you are finished.