Export to RAM SBeam dialog
Used to specify design, member, and load criteria for beams designed in RAM SBeam.
Opens when the RAM SBeam tool is selected in the
Export group on the Design ribbon
tab.
Note: You must have a separate license for RAM SBeam to use this feature. RAM SBeam must be
installed on the computer along with STAAD.Pro.
RAM SBeam is used for designing single-span,
steel beams (with or without cantilever on each end). The beams can be
designed with or without composite decking. The following requirements must
be applicable to the members for exporting:
- only wide flange, channel, and rectangular hollow tubes sections may be used
- multiple members must be connected and colinear
Setting | Description | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Design Criteria |
|
||||||||||||
Select Mid Span | When multiple, collinear members are selected for design, select the member number of the middle span from the drop-down list. The other 1-2 members are assumed to be cantilevered ends of this middle span. | ||||||||||||
Map Load Conditions | Use the table to select the RAM SBeam load types to assume for each load case from the STAAD.Pro Physical Modeler. |