Load |
Select the load case or load group to which this load will be added.
Tip: The
current load case or group is the default selection. This is displayed
in the program status bar and can be changed on the
View ribbon tab in the Active
Load group.
|
Direction |
The vector along which the
pressure acts:
- Global X
- Global Y
- Global Z
- local z (perindicular to the surface)
|
Variation along element |
How the variation in the
pressure is defined:
- Joint - select three nodes of the surface and assign a pressure
value to each.
- Local X / Y - Assign the initial and final pressure magnitude to the
minimum and maximum nodal coordinates in the selected local
axis.
|
Pressure n |
Corresponding pressure at the
node. |