Create: Load Combination dialog
This dialog is used to add a load case which consists of factored combinations of loads from other load cases.
Control | Description |
---|---|
Name | Type a name for the load combination. |
Description | Type a description used to annotate the load combination. |
Type | Select the combination method to use for this load combination: |
Analysis set | Select the analysis set with which you want to
associate this load combination.
Note: This option is only available when the REPEAT Primary Load
Cases option for Combination Load Cases is selected in
the Options dialog Analysis model
tab.
|
SRSS factor | The load factor coefficient, fSRSS, used for the square root value of the sum of the squares. |
Include Load Groups | (for REPEAT loads setting) Check this option to include load groups as repeat loads within load combinations. These |
Load type filter | Click to display a drop-down list of all current load case and load group types for inclusion in the load combination. You can filter our the factor tables by unchecking any unwanted load types. |
Load case factor | Click the field to display a table of filtered load cases and associated type. You can specify a load case factor and select the SRSS combination option. You can also check if this is a Notional load by specifying a notional load factor and selecting a direction. |
Load group factors | Click the field to display a table of filtered load groups and associated type. You can specify a load group factor for the combination. You can also check if this is a Notional load by specifying a notional load factor and selecting a direction. |