Support type
|
Select the type of support at this node:
- Restraints -
fixed against translation or rotation in the selected degrees of freedom.
- Springs -
linear and rotational springs which can act in tension-only or
compression-only, as well as in both reaction directions.
|
Segments
|
Type the number of segments along the member
where supported nodes will be created. The physical member will be divided into
this number of equal lengths.
|
Translation
|
Property | Value |
---|
X
|
Check to restrain translation along the
global X direction.
|
Y
|
Check to restrain translation along the
global Y direction.
|
Z
|
Check to restrain translation along the
global Z direction.
|
|
Rotation
|
Property | Value |
---|
X
|
Check to restrain rotation about the
global X axis.
|
Y
|
Check to restrain rotation about the
global Y axis.
|
Z
|
Check to restrain rotation about the
global Z axis.
|
|
Axial behavior
|
Select the
- Complete - full
axial behavior in both tension and compression
- Compression
only - support that resists compression only in the selected
directions
- Tension
only - support that resists tension only in the selected directions
Note: A spring
declared as tension-only or compression-only will carry axial forces only. It
will not carry moments.
|
X axis
|
Check to apply axial behavior selection in the X
direction.
|
Y
|
Check to restrain translation along the
global Y direction.
|
Z axis
|
Check to apply axial behavior selection in the Z
direction.
|
Translation
|
Property | Value |
---|
X
|
Type the spring constant
against translation in the global X direction.
|
Y
|
Type the spring constant
against translation in the global Y direction.
|
Z
|
Type the spring constant
against translation in the global Z direction.
|
|
Rotation
|
Property | Value |
---|
X
|
Type the spring constant against
rotation about the global X axis.
|
Y
|
Type the spring constant against
rotation about the global Y axis.
|
Z
|
Type the spring constant against
rotation about the global Z axis.
|
|