| Load |
Select the load case or load group to which this load will be added.
Tip: The
current load case or group is the default selection. This is displayed
in the program status bar and can be changed on the
View ribbon tab in the Active
Load group.
|
| Pressure
|
The magnitude of the uniform pressure over the
surface. Negative values may be used to reverse the direction.
|
| Direction
|
Select the direction in which the force acts:
- Global X
/ Y / Z – to apply loads parallel to the selected global axis.
- Local x /
y / z – to apply loads parallel to the local surface axis. Local x
and y loads are in the plane of the surface.
|
