Load |
Select the load case or load group to which this load will be added.
Tip: The
current load case or group is the default selection. This is displayed
in the program status bar and can be changed on the
View ribbon tab in the Active
Load group.
|
Axial Expansion
Load |
Type the change in
Temperature which will cause axial elongation in
the members or uniform volume expansion. |
Differential Loads |
Setting | Description |
---|
Vertical (Y) temperature difference |
Type the temperature differential from the top to the bottom
of the member. This results in bending about the local z
axis.. |
Lateral (Z) temperature difference |
Type the temperature differential from side to side of the
member. This results in bending about the local y axis. |
|