D13.C.3 Built-in Russian Steel Section Library
STAAD.Pro can check many standard sections in SP 16.13330.2011.
Section | Section Type | Designation form |
---|---|---|
I-beam (GOST 8239-89) | ST I12 | |
Regular I-beam (GOST 26020-83) | ST B1-10 | |
Broad-flanged I-beam (GOST 26020-83) | ST SH1-23 | |
Column I-beam (GOST 26020-83) | ST K1-20 | |
Channel (GOST 8240-89) | ST C14 | |
Equal legs angle (GOST 8509-89) |
|
ST L100x100x7 RA L100x100x7 |
Unequal legs angle (GOST 8510-89) |
|
ST L125x80x10 RA L125x80x10 |
Pipes (GOST 10705 and GOST 10706; welded and for gas piping) |
ST PIP102x5.5 or ST PIPE OD 0.102 ID 0.055 |
|
Roll-formed square and rectangular tubes (GOST 8639 and GOST 8645) |
ST TUB160x120x3 or ST TUBE TH 0.003 WT 0.12 DT 0.16 |
Section | Section Type | Designation form |
---|---|---|
Double channels |
D C14 SP 0.01 (SP – clear distance between channel walls) |
|
Double equal legs angles |
LD L100x100x7 SP 0.01 (SP – clear distance between angle walls) |
|
Double unequal legs angles with long legs back to back |
LD L125x80x10 SP 0.01 (SP – clear distance between angle walls) |
|
Double unequal legs angles with short legs back to back |
SD L125x80x10 SP 0.01 (SP – clear distance between angle walls) |
|
Tee with flange at the top |
T I12 T B1-10 T SH1-23 T K1-20 |
For entry of cross-sectional dimensions command MEMBER PROPERTIES RUSSIAN is used.
Refer to D13.B.2 Built-in Russian Steel Section Library for an example.