V.IBC 2018 Static Seismic T 1.2
Verify the program-calculated base shear and its distribution along the height of a three-story frame by using the equivalent lateral force method per IBC 2018. Also, verify the torsional moments to which the floors are subjected to, considering inherent as well as accidental torsion.
Details
A three-story structure is subject to a seismic load from the +X direction.
Assumptions
- Mapped MCER spectral response acceleration parameter at short period, Ss = 2.02
- Mapped MCER spectral response acceleration parameter at a period of 1 s, S1 = 0.795
- Risk Category – I (Hence, From Table 1.5-2, Importance Factor I = 1)
- Site Class – D (SCLASS 4)
- Response Modification Factor (RX & RZ) = 3
- Long-period Transition Time (TL)=12 s
- Seismic weight is composed of UDLs (magnitude -5 kN/m, direction GY) (defined in Reference Load Definition), incident on the beams
- Time Period of the Structure in both directions (PX & PZ) = 1.2 s
- Time period coefficients, CTX = CTZ = 0.28
- Exponents in time period equation: XX = XZ = 1
- The effect of shear deformation is neglected
Validation
Calculation of Base Shear
Based on Ss and S1, Fa = 1 (per table 11.4-1) and Fv = 1.7 (per table 11.4-2).
Hence:
SMS = Fa x Ss = 1 x 2.02 = 2.02 | Eq. 11.4-1 |
SDS = 2/3 × SMS = 1.347 | Eq. 11.4-3 |
SM1 = Fv x S1 = 1.7 x 0.795 = 1.382 | Eq. 11.4-3 |
SD1 = 2/3 × SM1 = 0.901 | Eq. 11.4-4 |
Eq. 12.8-2 |
The natural period of the structure, TN = 1.2 s (TX 1.2, provides as user input).
Height of the structure, h = 9 m.
So the approximate time period, Ta = Ct×hx = 0.28(9m)1.0 = 2.52 s
From Table 12.8-1, Cu = 1.4 (for SD1 > 0.4).
Cu × Ta = 3.528 s
The time period used, TR , is the lesser of TN and Cu×Ta , which is 1.2 s (< TL = 12 s).
Eq. 12.8-3 |
(CS)min1 = 0.044 × SDS × I = 0.059 | Eq. 12.8-5 |
Since S1 = 0.795 > 0.6g, equation 12.8-6 also needs to be considered for calculating the lower limit of Cs :
Eq. 12.8-6 |
Therefore, (Cs)min = 0.1325 < Cs.
Cs = 1.5× 0.2503 = 0.3754
The seismic weight, W is taken as the total seismic weight of the beams: = 5 × 3 × 69 = 1,035 kN
So the total base shear, V = CS × W = 0.3754 × 1,035 = 388.56 kN
Vertical Distribution of Lateral Forces
Since, time period of the structure T = 1.2 s > 0.5 s and T < 2.5 s, as per clause 12.8.3, value of k needs to be linearly interpolated.
k = 1.35
Hence, from equation 12.8-11 and equation 12.8-12, we can find the lateral forces in different story levels, as follows:
Consideration of Inherent Torsion (Clause 12.8.4.1)
Floor Level – Roof (9 m)
From output file, CRZ = 3. 831 m and CMZ = 3.848 m
Hence, static eccentricity esi = CMZ - CRZ = 0.017 m
Floor Level – 2nd (6 m)
From output file , CRZ = 3.858 m and CMZ = 3.848 m
Hence, static eccentricity esi = CMZ - CRZ = -0.01 m
Floor Level – 1st (3 m)
From output file , CRZ = 3.902 m and CMZ = 3.848 m
Hence, static eccentricity esi = CMZ - CRZ = -0.054 m
Consideration of Accidental Torsion (Clause 12.8.4.2)
At all floor levels:
0.05 × Lz = 0.05 × 9m = 0.45 m |
= |
Hence, total eccentricity to inherent and accidental torsion at roof level er = (0.45 + 0.017) = 0.467 m
Total eccentricity to inherent and accidental torsion at 2nd floor level e2 = (0.45 - 0.01) = 0.44 m
Total eccentricity to inherent and accidental torsion at 1st floor level e1 = (0.45 - 0.054) = 0.396 m
Total torsional moment at roof level = Froof × er = 215.20 × 0.467 = 100.51 kN·m
Total Torsional moment at 2nd floor level = F2nd × e2 = 124.50 × 0.440 = 54.779 kN·m
Total torsional moment at 1st floor level = F1st × e1 = 48.84 × 0.396 = 12.893 kN·m
Results
Result Type | Reference | STAAD.Pro | Difference | Comments |
---|---|---|---|---|
Base shear, V (kN) | 388.56 | 388.56 | none | |
Lateral force at roof level (kN) | 215.22 | 215.220 | none | |
Lateral force at 2nd floor (kN) | 124.50 | 124.497 | negligible | |
Lateral force at 1st floor (kN) | 48.84 | 48.839 | negligible | |
Torsional moment at roof level (kN·m) | 100.51 | 100.544 | negligible | |
Torsional moment at 2nd floor (kN·m) | 54.779 | 54.739 | negligible | |
Torsional moment at 1st floor (kN·m) | 19.340 | 19.312 | negligible |
STAAD.Pro Input File
The file C:\Users\Public\Public Documents\STAAD.Pro 2023\Samples \Verification Models\06 Loading\IBC\IBC 2018 Static Seismic T 1.2.STD is typically installed with the program.
STAAD SPACE
START JOB INFORMATION
ENGINEER DATE 08-Mar-19
END JOB INFORMATION
*****************************************************************************
*This problem is created to verify the base shear, distribution of base shear
*And Inherent and Accidental Torsional Moment at different floor levels
*Of the Structure
*****************************************************************************
INPUT WIDTH 79
SET SHEAR
UNIT METER KN
JOINT COORDINATES
1 0 0 0; 2 0 3 0; 3 3 3 0; 4 3 0 0; 5 0 0 3; 6 0 3 3; 7 3 3 3; 8 3 0 3;
9 0 0 6; 10 0 3 6; 11 3 3 6; 12 3 0 6; 13 0 0 9; 14 0 3 9; 15 3 3 9; 16 3 0 9;
17 6 3 0; 18 6 0 0; 19 6 3 3; 20 6 0 3; 21 6 3 6; 22 6 0 6; 25 9 3 3; 26 9 0 3;
27 9 3 6; 28 9 0 6; 33 0 6 0; 34 3 6 0; 35 0 6 3; 36 3 6 3; 37 0 6 6; 38 3 6 6;
39 0 6 9; 40 3 6 9; 41 6 6 0; 42 6 6 3; 43 6 6 6; 45 9 6 3; 46 9 6 6; 49 0 9 0;
50 3 9 0; 51 0 9 3; 52 3 9 3; 53 0 9 6; 54 3 9 6; 55 0 9 9; 56 3 9 9; 57 6 9 0;
58 6 9 3; 59 6 9 6; 70 9 9 3; 71 9 9 6; 72 -3 0 0; 73 -3 3 0; 74 -3 0 3;
75 -3 3 3; 76 -3 0 6; 77 -3 3 6; 80 -3 6 0; 81 -3 6 3; 82 -3 6 6; 84 -3 9 0;
85 -3 9 3; 86 -3 9 6;
MEMBER INCIDENCES
1 1 2; 2 2 3; 3 3 4; 4 2 6; 5 3 7; 6 5 6; 7 6 7; 8 7 8; 9 6 10; 10 7 11;
11 9 10; 12 10 11; 13 11 12; 14 10 14; 15 11 15; 16 13 14; 17 14 15; 18 15 16;
19 3 17; 20 7 19; 21 11 21; 23 17 18; 24 17 19; 25 19 20; 26 19 21; 27 21 22;
30 19 25; 31 21 27; 32 25 26; 33 25 27; 34 27 28; 40 2 33; 41 3 34; 42 6 35;
43 7 36; 44 10 37; 45 11 38; 46 14 39; 47 15 40; 48 17 41; 49 19 42; 50 21 43;
52 25 45; 53 27 46; 56 33 34; 57 33 35; 58 34 36; 59 35 36; 60 35 37; 61 36 38;
62 37 38; 63 37 39; 64 38 40; 65 39 40; 66 34 41; 67 36 42; 68 38 43; 70 41 42;
71 42 43; 73 42 45; 74 43 46; 75 45 46; 79 33 49; 80 34 50; 81 35 51; 82 36 52;
83 37 53; 84 38 54; 85 39 55; 86 40 56; 87 41 57; 88 42 58; 89 43 59; 95 49 50;
96 49 51; 97 50 52; 98 51 52; 99 51 53; 100 52 54; 101 53 54; 102 53 55;
103 54 56; 104 55 56; 105 50 57; 106 52 58; 107 54 59; 109 57 58; 110 58 59;
128 45 70; 129 46 71; 132 58 70; 133 59 71; 134 70 71; 135 2 73; 136 6 75;
137 10 77; 139 33 80; 140 35 81; 141 37 82; 143 49 84; 144 51 85; 145 53 86;
147 72 73; 148 73 75; 149 74 75; 150 75 77; 151 76 77; 154 73 80; 155 75 81;
156 77 82; 158 80 81; 159 81 82; 161 80 84; 162 81 85; 163 82 86; 165 84 85;
166 85 86;
DEFINE MATERIAL START
ISOTROPIC CONCRETE
E 2.17185e+07
POISSON 0.17
DENSITY 23.5616
ALPHA 1e-05
DAMP 0.05
TYPE CONCRETE
STRENGTH FCU 27579
END DEFINE MATERIAL
MEMBER PROPERTY AMERICAN
1 TO 21 23 TO 27 30 TO 34 40 TO 50 52 53 56 TO 68 70 71 73 TO 75 79 TO 89 -
95 TO 107 109 110 128 129 132 TO 137 139 TO 141 143 TO 145 147 TO 151 154 -
155 TO 156 158 159 161 TO 163 165 166 PRIS YD 0.4 ZD 0.4
CONSTANTS
MATERIAL CONCRETE ALL
SUPPORTS
1 4 5 8 9 12 13 16 18 20 22 26 28 72 74 76 FIXED
DEFINE REFERENCE LOADS
LOAD R1 LOADTYPE Mass TITLE REF LOAD CASE 1
MEMBER LOAD
2 4 5 7 9 10 12 14 15 17 19 TO 21 24 26 30 31 33 56 TO 68 70 71 73 TO 75 95 -
96 TO 107 109 110 132 TO 137 139 TO 141 143 TO 145 148 150 158 159 165 -
166 UNI GY -5
END DEFINE REFERENCE LOADS
FLOOR DIAPHRAGM
DIA 1 TYPE RIG HEI 3
DIA 2 TYPE RIG HEI 6
DIA 3 TYPE RIG HEI 9
DEFINE IBC 2018
SS 2.02 S1 0.795 I 1 RX 3 RZ 3 SCLASS 4 CTX 0.28 CTZ 0.28 PX 1.2 PZ 1.2 TL -
12 XX 1 XZ 1
LOAD 1 LOADTYPE Seismic TITLE SL +X
IBC LOAD X 1 DEC 2 ACC 0.05
PERFORM ANALYSIS PRINT LOAD DATA
PRINT DIA CR
FINISH
STAAD.Pro Output
***************************************************************************** * EQUIV. SEISMIC LOADS AS PER IBC 2018 * * PARAMETERS CONSIDERED FOR SUBSEQUENT LOAD GENERATION * * SS = 2.020 S1 = 0.795 FA = 1.000 FV = 1.700 * * SDS = 1.347 SD1 = 0.901 * ***************************************************************************** 73. LOAD 1 LOADTYPE SEISMIC TITLE SL +X 74. IBC LOAD X 1 DEC 2 ACC 0.05 75. PERFORM ANALYSIS PRINT LOAD DATA P R O B L E M S T A T I S T I C S ----------------------------------- NUMBER OF JOINTS 67 NUMBER OF MEMBERS 117 NUMBER OF PLATES 0 NUMBER OF SOLIDS 0 NUMBER OF SURFACES 0 NUMBER OF SUPPORTS 16 Using 64-bit analysis engine. SOLVER USED IS THE IN-CORE ADVANCED MATH SOLVER TOTAL PRIMARY LOAD CASES = 1, TOTAL DEGREES OF FREEDOM = 162 TOTAL LOAD COMBINATION CASES = 0 SO FAR. STAAD SPACE -- PAGE NO. 4 LOADING 1 LOADTYPE SEISMIC TITLE SL +X ----------- ************************************************************ * IBC 2018 SEISMIC LOAD ALONG X : * * CT = 0.280 Cu = 1.400 x = 1.0000 * * TIME PERIODS : * * Ta = 2.520 T = 1.200 Tuser = 1.200 * * TIME PERIOD USED (T) = 1.200 * * Cs LIMITS : LOWER = 0.133 UPPER = 0.375 * * LOAD FACTOR = 1.000 * * DESIGN BASE SHEAR = 1.000 X 0.375 X 1035.00 * * = 388.56 KN * ************************************************************ ************************************************************************ ***NOTE: SEISMIC LOAD IS ACTING AT CENTER OF MASS FOR RIGID DIAPHRAGM. TORSION FROM STATIC ECCENTRICITY (esi) IS INCLUDED IN ANALYSIS. DYNAMIC ECCENTRICITY APPLIED = DEC - 1 LOAD NO.: 1 DIRECTION : X UNIT - METE STORY LEVEL DYN. ECC. (dec) ACC. ECC. (aec) DESIGN ECC. ----- ----- --------------- --------------- --------------- X Z X Z X Z dec + aec dec + aec 1 3.00 -0.05 -0.05 0.60 0.45 0.00 0.40 2 6.00 0.01 -0.01 0.60 0.45 0.00 0.44 3 9.00 0.05 0.02 0.60 0.45 0.00 0.47 ************************************************************************ JOINT LATERAL TORSIONAL LOAD - 1 LOAD (KN ) MOMENT (KN -METE) FACTOR - 1.000 ----- ------- --------- DEC + AEC STAAD SPACE -- PAGE NO. 5 2 FX 3.185 MY 1.260 3 FX 3.185 MY 1.260 6 FX 4.247 MY 1.679 7 FX 4.247 MY 1.679 10 FX 4.247 MY 1.679 11 FX 4.247 MY 1.679 14 FX 2.123 MY 0.840 15 FX 2.123 MY 0.840 17 FX 2.123 MY 0.840 19 FX 4.247 MY 1.679 21 FX 3.185 MY 1.260 25 FX 2.123 MY 0.840 27 FX 2.123 MY 0.840 73 FX 2.123 MY 0.840 75 FX 3.185 MY 1.260 77 FX 2.123 MY 0.840 ----------- ----------- TOTAL = 48.839 19.312 AT LEVEL 3.000 METE 33 FX 8.119 MY 3.570 34 FX 8.119 MY 3.570 35 FX 10.826 MY 4.760 36 FX 10.826 MY 4.760 37 FX 10.826 MY 4.760 38 FX 10.826 MY 4.760 39 FX 5.413 MY 2.380 40 FX 5.413 MY 2.380 41 FX 5.413 MY 2.380 42 FX 10.826 MY 4.760 43 FX 8.119 MY 3.570 45 FX 5.413 MY 2.380 46 FX 5.413 MY 2.380 80 FX 5.413 MY 2.380 81 FX 8.119 MY 3.570 82 FX 5.413 MY 2.380 ----------- ----------- TOTAL = 124.497 54.739 AT LEVEL 6.000 METE 49 FX 14.036 MY 6.557 50 FX 14.036 MY 6.557 51 FX 18.715 MY 8.743 52 FX 18.715 MY 8.743 53 FX 18.715 MY 8.743 54 FX 18.715 MY 8.743 55 FX 9.357 MY 4.371 56 FX 9.357 MY 4.371 57 FX 9.357 MY 4.371 58 FX 18.715 MY 8.743 59 FX 14.036 MY 6.557 70 FX 9.357 MY 4.371 71 FX 9.357 MY 4.371 84 FX 9.357 MY 4.371 85 FX 14.036 MY 6.557 86 FX 9.357 MY 4.371 STAAD SPACE -- PAGE NO. 6 ----------- ----------- TOTAL = 215.220 100.544 AT LEVEL 9.000 METE ************ END OF DATA FROM INTERNAL STORAGE ************ 76. PRINT DIA CR DIA CR ************************************************************ CENTRE OF RIGIDITY UNIT - METE ------------------ ----------- DIAPHRAM FL. LEVEL X-COORDINATE Z-COORDINATE 1 3.000 2.393 3.902 2 6.000 2.335 3.858 3 9.000 2.299 3.831 ************************************************************