M. To automatically generate physical member restraints
Used the following procedure to automatically generate top and bottom flange restraint conditions for the selected physical members.
Note: The PBRACE command
generated by this menu item is valid only for AS 4100
(Australian) steel design.
- Create a STAAD.Pro model with steel members.
-
Either:
on the Analysis and Design ribbon tab, select the tool in the Design group
or
select the Design page
- Form one or more physical members in the model.
- Select AS4100 as the Current Code.
- Select one or more of the physical members.
-
On the Utilities ribbon tab, select the Physical Member Restraints tool in the Geometry Tools group.
The PBRACE commands are added for the current design parameter set with the tag (Physical).