T.2 User-defined concrete material
The STAAD input file commands generated are:
DEFINE MATERIAL START
ISOTROPIC CONCRETE-LTW
E 22
POISSON 0.17
DENSITY 1.9e-008
TYPE CONCRETE
STRENGTH RY 1 RT 1 FCU 0.025
END DEFINE MATERIAL
You will create a material definition for a lightweight concrete to use for all members.
-
Select the
Materials page in the
Analytical Modeling page control bar.
The Material - Whole Structure dialog and the Materials table open.
- In the Material - Whole Structure dialog Isotropic tab, click Create.
-
Input the required, user-defined material values for a lightweight
concrete:
- Type CONCRETE-LTW in the Title field.
- Type 22 in the Young's Modulus (E) field.
- Type 0.17 in the Poisson's Ratio (nu) field.
- Type 1.9e-008 in the Density field.
- Select CONCRETE from Type of Material drop-down list.
- Type 0.025 in the Compressive strength (Fcu) field.
Leave the remaining property fields as zero for this tutorial exercise. The shear modulus is calculated based on E and Poisson's ratio and the thermal coefficient and critical damping default to zero. Refer to the TR.26.1 Define Material for details.
Tip: The material definition can be edited later by selecting the material in the isotropic materials list and clicking Edit.The new material is added to the Material table and the list of isotropic materials.