M. To add pressure load on a plate
To add a uniform pressure load over an entire plate or a rectangular portion of a plate, use the following procedure.
-
Either:
On the Loading ribbon tab, select the Load Items tool in the Loading Specifications group
Tip: This will add the load item to the currently selected load group selected in the program status bar.or
In the Load & Definition dialog, select a primary load case in the Load Cases Details list and then click Add.
- Select either:
- Type the magnitude of the uniform pressure (with sign), W1.
- For partial plate pressure loads, type the coordinates (with respect to the center of the element) to the first and second corners of the loaded rectangular area: X1, Y1, X2, and Y2
-
Select the
Direction option in which the load acts.
Pressure loads can act in any of the global directions: GX, GY, or GZ as well as in the Local Z direction of the plate.
Additionally, full pressure loads can act in the Local Y or Local X directions of the plate as well along projected directions, PX, PY, or PZ.
- Click Add. The load item is added to the selected load case.