Used to instruct STAAD.Pro to perform an imperfection analysis, which will reflect the secondary effects only if the camber and/or drift is specified in a using the Define Imperfection command. For combination of load cases, with imperfection, use the Repeat Load specification rather than the Load Combination.
Refer to sections
TR.26.6 Member Imperfection Information
and
TR.37.9 Imperfection Analysis
for additional details.
There are no other parameters associated with this command.
| Setting | Description |
|---|
| Print Option |
Standard STAAD.Pro analysis print options:
| Setting | Description |
|---|
| No Print
|
No analysis results will be printed to the output
file.
|
| Load Data
|
Prints all the load data.
|
| Statics Check
|
Provides a summation of the applied loads and support
reactions as well as a summation of moments of the loads and reactions taken
around the origin.
|
| Statics Load
|
Prints everything that
Statics Check does, plus a summation of all
internal and external forces at each joint. This option potentially generates a
large volume of output.
Note: Since
PRINT STATIC LOAD generates voluminous output, the
printing of summation of internal and external forces at each joint is done for
structures which have less than 1,000 joints. If the structure has 1,000 joints
or more, this printing will be skipped.
|
| Mode Shapes
|
Prints mode shape values at the joints for all
calculated mode shapes.
|
| Both
|
This option is equivalent to the
Load Data plus
Statics Check options.
|
| All
|
This option is equivalent to the
Load Data plus
Statics Check.
|
|
