Create Primary Load Case dialog

Used to create new primary load cases.

Opens when the Primary Load Case tool is selected from the Loading Specifications group on the Loading ribbon tab.

Setting

Description

Number

Specify a the load case Number the program recommends, or specify one of our own.

Note: If the load case number has been previously used in this input file, a warning message will be displayed.

Loading Type

Used to associate the load case we are creating with any of the ACI, AISC, or IBC definitions of Dead, Live, Ice, etc. This type of association needs to be done in order to make use the program's facility for automatically generating load combinations in accordance with those codes.

The available load types are the following:

Dead	Soil	Ice
Live	Rain Water/ Ice	Wind on Ice
Roof Live	Ponding	Crane Hook
Wind	Dust	Mass (See Notes a-c)
Seismic-H (horizontal, See Note d)	Traffic	Gravity
Seismic-V (vertical, See Note d)	Temperature	Push
Snow	Accidental	None
Fluids	Flood

Reducible per UBC/IBC

(for Loading Type = Live only) Select this option if the load will be a reducible load per building code.

The UBC 1997, IBC 2000, and IBC 2003 codes permit reduction of floor live loads under certain situations. Please refer to TR.32.4 Area, One-way, and Floor Load Specifications for details of this feature.

Title

Type an optional title which is used to describe the load for identification in modeling and in reports.