1. Checks for re-entrant corners in floor slabs

   The program performs checks on each floor slab and reports whether the condition set out in EC-8 for re-entrant corners has been satisfied.

2. Check for slenderness of structure

   The program calculates a "slenderness ratio" for the structure based on the maximum dimensions on plan and reports whether the EC-8 criteria are satisfied.

3. Checks for torsional radius

   The program calculates the torsional radius for each floor and checks against the conditions set out in EC-8. These are summarized in the Check Regularity in Plan dialog and the Torsional Radius Check table will display details.

Opens when the Eurocode 8 | Plan Regularity page is selected.