EX. Check for errors and align columns

Perform error checks:

Select Analysis > Slab Error Check. This should result in no warnings or messages.
Select Analysis > Beam Error Check. This should result in no warnings or messages.

Select Analysis > Finalize Plan (with Continuity). A message dialog confirms the plan is finalized.

Select Workspace > 3D Frame. If the 3D View window opens, close this window.

Note: You are now in the frame workspace, which has different menu options.

Select Assign > Column Sizing and Orientation. The Column Sizing window opens.

Set the column offset so that the faces of the columns align with the faces of the exterior beams:

Click Column C1 to select it (the top, left column).
In the Column Offset And Beta Angle diagram, click corner 4 (the top, left corner).
Click Update Offset Data & Beta Angle. The column face is aligned to this point on the beams.

Repeat step 6 for each of the edge and corner columns, selecting the corresponding edge or corner for alignment.

Close the Column Sizing window.