STAAD.Pro Help

D5.D.10 Belgian National Annex to EC3

Adds values from the Belgian National Annex—titled National Annex to Standard NBN-EN 1993-1-1 ANB: 2018—for use with Eurocode 3, or EN 1993-1-1:2005. The NA document makes small changes to the base document.

The following clauses are not implemented in STAAD.Pro:

Clause 6.3.2.4(1) B – Slenderness for flexural buckling
STAAD.Pro does not use this clause for design per EC-3. Therefore, this clause is ignored for the Belgian National Annex.
Clause 6.3.2.4(2)B – Modification factor "kfl"
STAAD.Pro does not use this clause for design per EC-3. Therefore, this clause is ignored for the Belgian National Annex.
Note: Refer to the basic code (EC3) for a description of these clauses. The sections below refer to the corresponding clauses in the NBN-NA.

The clauses/sections in EN 1993-1-1:2005 (hereafter referred to as EC-3) that have been dealt with in the Belgian National Annex (hereafter referred to as NBN-NA) and that are relevant to the proposed implementation are:

D5.D.10.1 Clause 6.1(1) – General
D5.D.10.2 Clause 6.3.2.2 –Elastic critical moment and imperfection factors for LTB checks
D5.D.10.3 Clause 6.3.2.3(1) – LTB for rolled sections or equivalent welded section
D5.D.10.4 Clauses 6.3.2.2 and 6.3.2.3 — Calculation of LTB Reduction factor, χLT as per Belgium NA
D5.D.10.5 Clause 6.3.2.3(2) – Modification factor, f, for LTB checks
D5.D.10.6 Clause 6.3.3(5) – Interaction factors kyy, kyz, kzy, and kzz
D5.D.10.7 Clause 6.3.1.4 - Slenderness for torsional and torsional-flexural buckling
Parent topic: D5.D. European Codes - National Annexes to Eurocode 3 [EN 1993-1-1:2005]
Related topics