D13.E.3 Supported Section Profiles
STAAD.Pro can check many standard sections in SP 16.13330.2017.
D13.E.3.1 Built-in Russian Steel Section Library
These profiles use the SGR to specify the grade of steel.
| Section | Section Type | Designation form |
|---|---|---|
| I-beam (GOST 8239-89) |
|
ST I12 |
| Regular I-beam (GOST 26020-83) | ST B1-10 | |
| Broad-flanged I-beam (GOST 26020-83) | ST SH1-23 | |
| Column I-beam (GOST 26020-83) | ST K1-20 | |
| Channel (GOST 8240-89) |
|
ST C14 |
| Equal legs angle (GOST 8509-89) |
|
ST L100x100x7 RA L100x100x7 |
| Unequal legs angle (GOST 8510-89) |
|
ST L125x80x10 RA L125x80x10 |
| Pipes (GOST 10705 and GOST 10706; welded and for gas piping) |
|
ST PIP102x5.5 or ST PIPE OD 0.102 ID 0.055 |
| Roll-formed square and rectangular tubes (GOST 8639 and GOST 8645) |
|
ST TUB160x120x3 or ST TUBE TH 0.003 WT 0.12 DT 0.16 |
| Section | Section Type | Designation form |
|---|---|---|
| Double channels |
|
D C14 SP 0.01 (SP – clear distance between channel walls) |
| Double equal legs angles |
|
LD L100x100x7 SP 0.01 (SP – clear distance between angle walls) |
| Double unequal legs angles with long legs back to back |
|
LD L125x80x10 SP 0.01 (SP – clear distance between angle walls) |
| Double unequal legs angles with short legs back to back |
|
SD L125x80x10 SP 0.01 (SP – clear distance between angle walls) |
|
Tee with flange at the top |
|
T I12 T B1-10 T SH1-23 T K1-20 |
For entry of cross-sectional dimensions command MEMBER PROPERTIES RUSSIAN is used.
Refer to D13.B.2 Built-in Russian Steel Section Library for an example.
D13.E.3.2 Standard European Profiles
The following profile types are supported using the ENSGR parameter to specify steel grade.
- Wide Flange: IPE, HD, HE, HL, HP, DIL, IPE
- Channel: U, UPE, UPN
- Angle: L
- Circular Hollow: CHC, Pipe
- Rectangular Hollow: RHS, SHS, Tube