| Displacement |
Displays the nodal and
beam sectional displacements, along with the Node
Displacements table and Beam
Relative Displacements Detail table. This has
the same effect as selecting the Displacements
page in the Postprocessing workflow. |
| Reaction |
Displays the support reactions, along with the Support Reactions table and Statics
Check Results table. This has the same effect as selecting the
Reactions page in the Postprocessing
workflow. |
| Instability |
Displays unstable joints if any were detected in the analysis along with
the Unstable Joints table.Note: This tool is only
active if instabilities are detected during the
analysis.
|
| Base Pressure |
Displays the soil pressure at support node locations for slabs
consisting of plate elements generated using either the elastic mat or plate mat commands
along with the Base Pressure
table.Note: This tool is only active if
ELASTIC MAT or PLATE MAT
commands are present in the input file.
|
