To add a UPT I-Section with different flange sizes

1. (Optional) Select Tools > Select Input Units. Select appropriate units for length and click OK.

2. Select Tools >  Create User Table.

   If no User Defined Table exists, you will be prompted to create one.

   The Create User Provided Table dialog opens.

3. Click New Table.

   The Select Section Type dialog opens.

4. In the Select Section Type list, select WIDE FLANGE and then click OK.

   Tip: You can also use this dialog to save the User Provided Table as a separate file.

   The dialog closes and the Select Existing Table list in the Create User Provided Table dialog now has at least one entry.

5. Click Add New Property.

   The Wide Flange dialog opens.

   

6. Type dimensions in the D, TF, WF, TW, TF1, and, WF1 fields to define the section.

   Two new fields— TF1 and WF1 —are used to specify different dimensions for the bottom flange. If these fields are left empty, the values for the top flange are used (doubly symmetric section).

   Note: Refer to TR.19.1 Wide Flange for detailed descriptions on properties of Wide Flange sections in User Steel tables.

7. Click Calculate.

   The derivative cross section properties are calculated.

8. Click OK.

   The dialog closes and the section is added to the Table Data list in the Create User Provided Table dialog.