D12.A.8 Tabulated Results
This section presents a table with the various TRACKs available with respect to print out from the code check. Example prints and explanation to the information / heading given on the print out is given in Appendix A.
| TRACK no. | Description |
|---|---|
| 0 | Brief print of member utilizations (2 lines for each member) sorted with highest utilized members first |
| 1 | Based on TRACK 3 with additional information regarding stability factors and capacities |
| 2 | Simple print of stresses, including von Mises stress |
| 3 | Brief print of member utilizations (two lines for each member) |
| 9 | Comprehensive print with detailed information about member and member utilization(one page for each member) |
| 99 | Used in connection with tubular joint check according to NPD. This TRACK identifies tubular joints to be checked and classifies all members entering the joint as T connection |
| 98 | Used in connection with tubular joint check according to NPD. This TRACK performs the joint capacity check |
| 49 | Prints member end forces for members entering each joint (at the end of the member connected to the joint) |
| 31 | Prints maximum and minimum member end forces (axial force defines max and min) at member end 1 |
| 32 | Prints maximum and minimum member end forces (axial force defines max and min) at member end 2 |