T.1 Creating a load combination
-
On the
Model ribbon tab, select the
Load Combination tool in the
Loads group.
The
Add Load Combination dialog opens.
-
Type
75 Percent of [DL+LL+WL] in the
Name field.
-
Select
Linear as the load combination
Type.
-
Click in the
Load case filter field and then check the
(Select All) option.
-
Assign the load case factors:
-
Click in the
Factors field.
The load case factors table opens. All the load cases
in the model are included from the previous step.
-
For load case 1 (the first row in the table), click in the
Factor cell and type
0.75.
-
Repeat step 5a to enter a load case factor of 0.75 for the
wind load (load case 2).
-
Click
OK.
-
Click
OK.
