To add a parametric wind load definition per the SP 2.07.7 or SP 20.13330.2016 Loads and Actions building codes, use the following procedure.

1. In the Load & Definition dialog, select the Definitions > Wind Load entry and then click Add. The Add new: Wind Definition dialog opens.
2. Select one of the following options from the Code drop-down list:
   • SNiP 2.07.7-85
   • SNiP 20.13330.2016
   Tip: You can also type optional Comments to further describe the wind definition (e.g., "Wind in X direction").
3. Click Add. The definition type is added to the Definitions > Wind Load entry in the Load & Definition dialog.
4. In the Load & Definition dialog, select the new wind definition type and click the Add. The Add New: Wind Definitions dialog opens. The dialog now displays the Intensity and Exposures tabs.
   Note: The previously selected Code displays as a read-only selection.
5. Type the Wind Pressure.
6. Select the Terrain type from the drop-down list.
7. Select the Region from the drop-down list.
8. Type the Delta value.
9. Click Add.