8D.D.7 Tabulated Results of Steel Design
An example of a TRACK 2.0 output for a compression member is shown here:
STAAD.PRO CODE CHECKING - ( IS-802) v1.0
********************************************
|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CM UNIT |
| * |=============================| ==| |== ------------ |
|MEMBER 8 * | INDIAN SECTIONS | | | AX = 17.0 |
| * | ST ISA125x95x8 | | | --Z AY = 6.7 |
|DESIGN CODE * | | | | AZ = 5.1 |
| IS-802 * =============================== ==| |== SY = 38.8 |
| * SZ = 16.6 |
| * |<---LENGTH (ME= 1.80 --->| RY = 4.4 |
|************* RZ = 2.0 |
| |
| |
|PARAMETER BOLTING STRESSES |
|IN NEWT MM IN NEWT MM|
|--------------- ------------- -------------|
| L/R-Y = 40.5 BOLT DIA = 12 MM FA = 188.4 |
| L/R-Z = 87.9 BOLT CAP = 24.66 KN fa = 80.7 |
| KL/R = 87.9 # BOLT = 6 FYB = 436.0 |
| FYLD = 250.0 FVB = 218.0 |
| GALVA = 0.0 |
| C = 1.0 |
| LEG = 1.0 |
| ELA = 1.0 |
| NSF = 1.0 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY ( KN-METR) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| PASS COMPRESSION 0.428 1 |
| 137.13 C 0.0 0.0 0.00 |
|* *|
|**************************************************************************|
| |
|--------------------------------------------------------------------------|