Specifying a design using SP 16.13330.2011

1. Select the Design | Steel page.

   The Steel Design - Whole Structure dialog opens.

2. In the Current Code list, select the SP 16.13330.2011.

3. Click Define Parameters list.

   The Define Parameters dialog opens.

4. Specify one or more design parameters as necessary.

   Note: Refer to the descriptions in the dialog or to D13.C.4 Design Parameters for definitions of the design parameters and default values used.

5. Click Add.

   This will insert the following commands into the STAAD input file:

   CODE RUSSIAN

   Tip: To use the older edition of the Russian steel design code, the command CODE RUSSIAN 1990 is required.

6. Assign the code parameters to members as necessary.