To initiate the design of timber members and specify the code parameters, use the following procedure.

1. On the Analysis and Design ribbon tab, select Timber in the Design group gallery. The Timber Design - Whole Structure dialog opens.
2. In the Timber Design - Whole Structure dialog, select the applicable concrete design code from the Current Code drop-down list.
3. Click Define Parameters. The Design Parameters dialog opens.
4. Specify a value or option for each required parameter for a set of members and then click Add. You only need to specify parameters that require a different value from the default value. Repeat this step for all non-default parameters.
   Note: Different parameters can be used for different member type designs (e.g., columns, beams, etc.). Alternatively, you can use a separate set of parameters for different member types.
5. Click Close. The design parameters are marked with an icon. This indicates that the need to be assigned to members.
6. Use one of the STAAD.Pro assignment methods to assign each parameter to the applicable members.