Results of code checking and member selection are presented in a tabular format. The term CRITICAL COND refers to the section of the CAN/CSA-S16-01 specification which governed the design.

If the TRACK parameter is set to 1.0, factored member resistances will be printed. Following is a description of some of the items printed.

CR

Factored compressive resistance

TR

Factored tensile resistance

VR

Factored shear resistance

MRZ

Factored moment resistance (about z-axis)

MRY

Factored moment resistance (about y-axis)

Further details can be obtained by setting TRACK to 2.0.

CR1

CAPACITY (C_r) PER 13.8.2(a)

CR2

CAPACITY (C_r) PER 13.8.2(b)

CRZ

SEE 13.8.2(b) for uniaxial bending (called C_RX in that Clause)

CTORFLX

Capacity in accordance with 13.8.2(c)