EX. To define general pushover data

On the Loading ribbon tab, select the Pushover tool in the Define Loading Systems group. The Create New Definitions / Load Cases / Load Items dialog opens with only the Pushover tab displayed.
On the Define Input tab, select the General Input Parameters option.
Select Moment Frame as the Type of Frame.
Select Ignore Effect from the Geometric Non-Linearity Effect drop-down list.
Set the Displacement Incremental Value option and then type 0.010 (in) in the text field.
Click Add.
Select the Member Specific Parameter option.
Set the Expected Yield Stress option and then type 36.0 (kip/in²) in the text field.
Note: You will assign this parameter to members in a later procedure.
Click Add.

In the next procedure, you will define the loading pattern and spectrum data, so you can leave the Define Pushover dialog open.