To transfer the generated load cases to STAAD.Pro for analysis and design, do the following.

1. On the Bridge Deck ribbon tab, select the Loading > Create Loading in STAAD Model tool in the Loading group. A message dialog opens to confirm the load was successfully added in the STAAD input file.
2. Select the Analytical Modeling workflow.
3. On the Loading page, review the loads added to the input file in the Load & Definitions dialog.
   Note: One load was added for each action requested in the Load Generators Parameters dialog.
4. (Optional) Select the Design | Steel page and define parameters for the BS5400 code to perform a member design in addition to analysis for the generated loads.
5. On the Analysis and Design ribbon tab, select the Run Analysis tool in the Analysis group.