The purpose of code checking is to ascertain whether the provided section properties of the members are adequate. The adequacy is checked as per BS5950. Code checking is done using the forces and moments at specific sections of the members. If no sections are specified, the program uses the start and end forces for code checking.

When code checking is selected, the program calculates and prints whether the members have passed or failed the checks; the critical condition of BS5950 code (like any of the BS5950 specifications for compression, tension, shear, etc.); the value of the ratio of the critical condition (overstressed for value more than 1.0 or any other specified RATIO value); the governing load case, and the location (distance from the start of the member of forces in the member where the critical condition occurs).

Code checking can be done with any type of steel section listed in Section 2B.4 or any of the user defined sections as described in G.6.3 User-Provided Steel Table , except profiles defined in GENERAL and ISECTION tables.

コードチェックの一般的な情報については、「 D1.B.1.3 Code Checking」を参照してください。コードチェックコマンドの仕様の詳細については、「TR.49 コードチェックの設定」を参照してください。