The purpose of code checking is to ascertain whether the provided section properties of the members are adequate. The adequacy is checked as per DD ENV 1993-1-1:1992. Code checking is done using the forces and moments at specific sections of the members.

When code checking is selected, the program calculates and prints whether the members have passed or failed the checks; the critical condition ; the value of the ratio of the critical condition (overstressed for value more than 1.0 or any other specified RATIO value); the governing load case, and the location (distance from the start of the member of forces in the member where the critical condition occurs).

Code checking can be done with any type of steel section listed in Section 2B.4 or any of the user defined sections as described in G.6.3 User-Provided Steel Table , with two exceptions; GENERAL and ISECTION. The  EC3 DD design module does not consider these sections or PRISMATIC sections in its design process.

コードチェックの一般的な情報については、「 D1.B.1.3 Code Checking」を参照してください。コードチェックコマンドの仕様の詳細については、「TR.49 コードチェックの設定」を参照してください。