STAAD.Pro Help

D1.H.4 Code Checking

The purpose of code checking is to determine whether the initially specified member properties are adequate to carry the forces transmitted to the member due to the loads on the structure. Code checking is done at the locations specified by either the SECTION command or the BEAM parameter described above.

See T.1 – Steel Portal Frame for STAAD provides an example on the usage of the CHECK CODE command.

コードチェックの一般的な情報については、「 D1.B.1.3 Code Checking」を参照してください。コードチェックコマンドの仕様の詳細については、「TR.49 コードチェックの設定」を参照してください。

D1.H.4.1 Example

Sample input data for Aluminum Design

PARAMETER  
CODE ALUMINUM
BEAM 1 ALL
KY 1.2 MEMB 3 4 
ALLOY 35 ALL
PRODUCT 2 ALL
TRACK 3 ALL
SELECT ALL
PARAMETER
CODE ALUMINUM
ALCLAD 1 ALL
STRUCT 1 ALL
CHECK CODE ALL