Double Angle dialog
Used to specify the section properties for a double angle user defined table section.
Opens when you click Add in the User Table Manager dialog when a Double Angle section table is selected.
Setting | Description |
---|---|
Section Name | Type a section name used to identify the shape in the table. |
D | アングルの高さ(ローカルy軸方向の脚の長さ) |
WF | アングルの幅(ローカルz軸方向の脚の長さ) |
TF | アングルの脚の厚さ |
SP | アングル間の間隔 |
Cross Section Area (Ax) | Cross section area. Can be automatically calculated by clicking the Calculate button. |
Inertia About Local z (Iz) | Moment of inertia about local z-axis (usually strong axis). Can be automatically calculated by clicking the Calculate button. |
Inertia About Local y (Iy) | Moment of inertia about local y-axis. Can be automatically calculated by clicking the Calculate button. |
Torsional Constant (Ix) | Moment of inertia about local x-axis. Can be automatically calculated by clicking the Calculate button. |
C.G. along local Y (Cy) | Distance from the face of angles to the center of gravity (C.G.) along the local y-axis. Can be automatically calculated by clicking the Calculate button. |
Shear Area in Y (Ay) | Shear area in local y-axis. If zero, shear deformation is ignored in the analysis. Can be automatically calculated by clicking the Calculate button. |
Shear Area in Z (Az) | Same as above except in local z-axis. Can be automatically calculated by clicking the Calculate button. |
Single Angle (rvv) | The radius of gyration about the minor principal axis for single angles - z-z axis for TA ST angles, and y-y axis for TA RA angles. |