STAAD.Pro Help

D. To specify aluminum design commands

To specify the code checking or design commands to be used for the aluminum design operation, use the following procedure.

  1. On the Aluminum Design - Whole Structure dialog, click Commands. The Design Commands dialog opens.
  2. To perform a design action, select one of the following options (as they are available for the code selection):
    To… Select…
    check the capacity of the current member sizes the CHECK CODE tab
    select a member size based on the last analysis results the SELECT tab
  3. Click Add.
  4. Click Close.
  5. Assign the design commands to the appropriate members.