STAAD.Pro Help

D4.B.5 Section Classification

The CSA specification allows inelastic deformation of section elements. Thus, local buckling becomes an important criterion. Steel sections are classified as plastic (Class 1), compact (Class 2), noncompact (Class 3), or slender element (Class 4) sections depending upon their local buckling characteristics (See Clause 11.2 and Table 1 of CAN/CSA-S16-01). This classification is a function of the geometric properties of the section. The design procedures are different depending on the section class. STAAD.Pro determines the section classification for the standard shapes and user specified shapes.
Note: The design of Class 4 sections requires STAAD.Pro V8i (SELECTseries 2) build 2007.07 or higher. Otherwise, design is performed for sections that fall into the category of Class 1,2 or 3 sections only.