# V. AISC LRFD - Angle Section Tension Capacity

To check the adequacy of a L4X4X1/2 American single angle to carry a tensile design load of 120 Kips.

## Reference

Hand calculation using the following reference:

AISC Load Factor Resistance Design, 3rd Edition, Example 3.2, case (a), page 3-7.

## Problem

Assume the reduction in area due to bolt holes to be equivalent to a net section factor of 0.795.

 Fy =36 ksi

## Hand Calculation

Net section = 0.795(3.75 in.2) = 2.98 in.2

$ϕ P n = { ϕ t F y A g = 0.9 ( 36 k s i ) ( 3.75 i n . 2 ) = 121.5 k ϕ t F u A e = 0.75 ( 58 k s i ) ( 2.98 i n . 2 ) = 129.6 k$

## Comparison

The reported STAAD.Pro value is based on the term PNT in the STAAD.Pro output.

Table 1. Comparison of results
Result Type Theory STAAD.Pro Difference
Design strength (kips) 121.5 121.5 none
Note: The assumed NSF of 0.795 is comparable to the term Ae/Ag which evaluates to 2.98/3.75.

## STAAD Input

The file C:\Users\Public\Public Documents\STAAD.Pro CONNECT Edition\Samples\ Verification Models\09 Steel Design\US\AISC\AISC LRFD - Angle Section Tension Capacity.STD is typically installed with the program.

STAAD SPACE TENSION CAPACITY PER AISC LRFD 3RD ED
START JOB INFORMATION
ENGINEER DATE 23-Sep-18
END JOB INFORMATION
*
*  OBJECTIVE : CHECKING THE DESIGN AXIAL TENSILE STRENGTH OF A
*  L4X4X1/2 AMERICAN SECTION. CAPACITY SHOULD BE 122 KIPS ACCORDING TO
*  EXAMPLE 3-2 ON PAGE 3-7 OF 3RD EDITION LRFD CODE.
*
UNIT FEET KIP
JOINT COORDINATES
1 0 0 0; 2 0 10 0;
MEMBER INCIDENCES
1 1 2;
MEMBER PROPERTY AMERICAN
1 TABLE ST L40408
UNIT INCHES KIP
DEFINE MATERIAL START
ISOTROPIC MATERIAL1
E 29000
POISSON 0.3
END DEFINE MATERIAL
UNIT FEET KIP
CONSTANTS
MATERIAL MATERIAL1 ALL
SUPPORTS
1 FIXED
LOAD 1
JOINT LOAD
2 FY 120
PERFORM ANALYSIS
UNIT INCHES KIP
PARAMETER 1
CODE LRFD
FU 58 ALL
* NSF = 2.98/3.75 = 0.795
NSF 0.795 ALL
TRACK 1 ALL
CHECK CODE ALL
FINISH

## STAAD Output

STAAD.Pro CODE CHECKING - (LRFD 3RD EDITION)   v1.0
***********************
ALL UNITS ARE - KIP  INCH (UNLESS OTHERWISE Noted)
MEMBER     TABLE       RESULT/   CRITICAL COND/     RATIO/     LOADING/
FX            MY             MZ       LOCATION
=======================================================================
1  ST   L40408                   (AISC SECTIONS)
PASS     LRFD-H1-1A-T       0.988         1
120.00 T          0.00           0.00        0.00
+---------------------------------------------------------------------+
| DESIGN STRENGTHS FOR MEMBER     1       UNITS - KIP IN              |
| PNC=   34.36  PNT=  121.50  MNZ=   96.57  MNY=  134.69  VN=   25.92 |
+---------------------------------------------------------------------+