STAAD.Pro Help

T.2 Restricting the load cases for results

To restrict the load cases for which results are viewed, use the following procedure.

  1. On the Results ribbon tab, select the Select Load Case tool in the Configuration group.

    The Results Setup dialog opens.
  2. Click [<<].

    All load cases are moved from the Selected list to the Available list.

  3. Select two load cases to use for viewing results:
    1. Press and hold the <Ctrl> key and then select load cases 1 DEAD LOAD and 3 WIND LOAD.
    2. Click [>].
    3. Click OK.