STAAD.Pro Help

T.1 Creating a load combination

  1. On the Model ribbon tab, select the Load Combination tool in the Loads group.

    The Add Load Combination dialog opens.
  2. Type 75 Percent of [DL+LL+WL] in the Name field.
  3. Select Linear as the load combination Type.
  4. Click in the Load case filter field and then check the (Select All) option.
  5. Assign the load case factors:
    1. Click in the Factors field. The load case factors table opens. All the load cases in the model are included from the previous step.
    2. For load case 1 (the first row in the table), click in the Factor cell and type 0.75.
    3. Repeat step 5a to enter a load case factor of 0.75 for the wind load (load case 2).
    4. Click OK.
  6. Click OK.