STAAD.Pro Help

M.To create an prismatic user table section

To create a generic user-provided table section providing only cross section properties, use the following procedure.

You may want to change the input dimensions prior to creating user provided table sections. Select Tools > Set Current Input Unit to do so.

This section type is useful when you only have cross-section property values or if the necessary section shape does not classify as any of the other user-provided section types.
  1. On the Specification ribbon tab, select the User Table > User Table Manager tool in the Beam Profiles group.

    If no User Defined Table exists, you will be prompted to create one.

    The User Table Manager dialog opens.
  2. Click New Table. The New User Table dialog opens.
  3. the Select Section Type list, select PRISMATIC and then click OK. The dialog closes and the Table Data list in the User Table Manager dialog now has at least one entry.
  4. Click Add. The Prismatic dialog opens.
  5. Type a Section Name.
  6. 必須: Enter the following angle section parameters:
    Depth of the section in the direction of the local y-axis.
    Depth of the section in the direction of the local z-axis
  7. Specify the section properties:
    Cros Section Area (Ax)
    Cross-section area
    Inertia about local z (Iz)
    Moment of inertia about the local z-axis
    Inertia about local y (Iy)
    Moment of inertia about the local y-axis
    Torstional Constant (Ix)
    Torsional constant
    Shear Area in Y (Ay)
    Shear area for shear parallel to local y-axis.
    Shear Area in Z (Az)
    Shear area for shear parallel to local z-axis.
  8. Click OK.
  9. (オプション) Repeat steps 4 through 8 to add more prismatic sections.
  10. Click Close.

The section can now be added for use in the Properties - Whole Structure dialog by selecting it in the User Property Table dialog.

Refer to EX. US-17 User-Provided Tables and EX. UK-17 User-Provided Tables for examples of angle user-provided tables.