STAAD.Pro Help

M. To Change Supports

To change boundary conditions for the 3D frame, use the following steps.

The supports are at each column or wall base at the first (lowest) level in the building frame. Initially, all supports are assumed as Fixed.

  1. Select Assign > Support Specification

    The Support Specification dialog opens.

  2. Select the one or more columns or walls.
    ヒント: Use the Selection drop-down list to change the selection method.
  3. Right-click on a column or wall and select Support Condition - mark from the pop-up menu.

    The Support Information dialog opens.

  4. Select the Support Options to use.
  5. For Fixed But option, either:

    specify the Release-Spec


    Spring-Spec and spring constant for each degree of freedom as necessary.

  6. Click OK.
  7. Repeat Steps 3 through 6 for each support you want to change.
    ヒント: The support type is color-coded in the Support Specification dialog.
  8. Click the X in the top,right-hand corner of the Support Specification dialog when you are finished making changes to the supports. The Support Details table updates with the changes.