D. Available Steel Design Codes
All steel design codes are available using the batch design method in the Analytical Modeling workflow (e.g., via the STAAD input file) where not specifically stated otherwise in the workflow column.
Batch Design
| Country/Region | Code | Title |
|---|---|---|
| Australia | AS 4100-1998 | Standards Australia - Steel Structural Design, including Amendment 1 (2012) |
| Belgium | NBN EN 1993-1-1:2005 | Belgian National Annex (EC3) |
| Canada | CAN/CSA-S16-01 | Limit States Design of Steel Structures |
| S136-94 | Specification for the Design of Cold-Formed Steel Structural Members | |
| CAN/CSA-S16-09/14/19 | Limit States Design of Steel Structures (2009, 2014, and 2019 editions) | |
| Europe | EC3 BS EN 1993-1-1:2005 | Eurocode 3: Design of steel structures Part 1.1 General rules and rules for buildings |
| Finland | SFS EN 1993-1-1 | Finnish National Annex (EC3) |
| France | CM66 1977 | Regulations for the calculation of steel structures and Design rules for structural steelwork, Addendum 80 |
| NF EN 1993-1-1/NA | French National Annex (EC3) | |
| Germany | DIN 18 800 Part 1 | Structural steelwork. Safety against buckling of linear members and frames |
| DIN EN 1993-1-1:2005 | German National Annex (EC3) | |
| India | IS 800 1984, ASD | Code of Practice for General Construction in Steel |
| IS 800 2007, LSD | General Construction in Steel - Code of Practice (Third Revision) | |
| IS 800 2007, WSD | General Construction in Steel - Code of Practice (Third Revision) | |
| IS 801 1975 | Code of Practice for Use of Cold-Formed Light Gauge Steel Structural Members in General Build Construction | |
| IS 802 1995 | Use of Structural Steel in Overhead Transmission Line Towers - Code of Practice | |
| Japan | AIJ 2002 | Design Standard for Steel Structures |
| AIJ 2005 | Design Standard for Steel Structures | |
| Malaysia | MS-EN 1993-1-1 | Malaysian National Annex (EC3) |
| Mexico | NTC 1987 | Normas Técnicas Complementarias para Diseño y construcción de Estructuras Metálicas - LRFD |
| Netherlands | NEN EN 1993-1-1/NB | Dutch National Annex (EC3) |
| New Zealand | NZS 3404-1997 | New Zealand Standard for Steel Structures, Parts 1 & 2, including Amendments 1 & 2. |
| Norway | NPD 1993 | Veiledning om utforming, beregning og dimensjonering av stalkonstruksjoner. Sist enderet 1. |
| NS 3472 2001 | Steel structures. Design rules (3rd Edition) | |
| NORSOK N-004 | NORSOK N-004 Rev 2, October 2004 | |
| NS EN 1993-1-1:2005/NA:2008 | Norwegian National Annex | |
| Russia | SNiP 2.23-81* 1990 | Design Standards for Steel Construction |
| SP 16.13330.2011 | Code of Practice: Steel Structures | |
| SP 16.13330.2017 | Code of Practice: Steel Structures | |
| Poland | PN-EN 1993-1-1 | Polish National Annex (EC3) |
| Singapore | SS EN 1993-1-1:2005 | Singaporean National Annex (EC3) |
| South Africa | SANS10162-1:1993 | The structural use of steel Part 1: Limit-states design of hot-rolled steelwork |
| SANS 10162-1:2011 | Design of steel structures | |
| Sweden | BFS EN 1993-1-1:2005 | Swedish National Annex (EC3) |
| United Kingdom | BS 5950-1:2000 | Structural use of steelwork in building - Part 1: Code of practice for design - Rolled and welded sections, Incorporating Corrigendum No. 1 |
| BS 5950-5:1998 | Structural use of steelwork in building - Part 5. Code of practice for design of cold formed thin gauge sections | |
| BS 5400:Part 3:1982 | Steel, concrete and, composite bridges Part 3. Code of practice for design of steel bridges and Amd No. 4051 and Amd No. 6488 | |
| BS EN 1993-1-1:2005 | British National Annex (EC3) | |
| United States | AISC ASD | Specification for Structural Steel Buildings. Allowable Stress Design and Plastic Design (1989, 9th Edition) |
| AISC LRFD | LRFD Specification for
Structural Steel Buildings (1999, 3rd Edition)
Load and Resistance Factor Design Specification for Structural Steel Buildings (1993, 2nd Edition) |
|
| ANSI/AISC 360-16 | Specification for Structural Steel Buildings (Unified
specification), 2016 Edition and Design Guide #9 and AISC 341-16
Seismic Provisions. Both customary and metric units are supported. |
|
| ANSI/AISC 360-10 | Specification for Structural
Steel Buildings (Unified specification), 2010 Edition and Design Guide #9 and
AISC 341-10 Seismic Provisions.
Both customary and metric units are supported. |
|
| ANSI/AISC 360-05 | Specification for Structural
Steel Buildings (Unified specification), 2005 Edition and Supplement 1, April
2002 and AISC 341-05 Seismic Provisions.
Both customary and metric units are supported. |
|
| AISC ASD 1989 | AISC ASD 1989 9th edition Castellated | |
| AISI S100-16 | North American Specification for the Design of Cold Formed Steel Structural Members | |
| AASHTO ASD | Standard Specifications for Highway Bridges, 17th Edition (2002); Chapter 10, Part C | |
| AASHTO LRFD | LRFD Design Specification, 2nd Edition (1998) | |
| API 2A-WSD | Recommended Practice for Planning, Design and Constructing Fixed Offshore Platforms-Working Stress Design , 21st Edition | |
| ASCE 10-97 | Design of Latticed Steel Transmission Structures |
Nuclear Codes
| Code | Title |
|---|---|
| ASME NF 3000 1974 | ASME Boiler and Pressure Vessel Code, Section III Rules for Construction of Nuclear Power Plant Components, Division 1 - Appendices - Subsection NF |
| ASME NF 3000 1977 | ASME Boiler and Pressure Vessel Code, Section III Rules for Construction of Nuclear Power Plant Components, Division 1 - Appendices - Subsection NF |
| ASME NF 3000 1989 | ASME Boiler and Pressure Vessel Code, Section III Rules for Construction of Nuclear Power Plant Components, Division 1 - Appendices - Subsection NF |
| ASME NF 3000 1998 | ASME Boiler and Pressure Vessel Code, Section III Rules for Construction of Nuclear Power Plant Components, Division 1 - Appendices - Subsection NF |
| ASME NF 3000-2001 | ASME Boiler and Pressure Vessel Code, Section III Rules for Construction of Nuclear Power Plant Components, Division 1 - Appendices - Subsection NF |
| ASME NF 3000-2004 | ASME Boiler and Pressure Vessel Code, Section III Rules for Construction of Nuclear Power Plant Components, Division 1 - Appendices - Subsection NF |
| AISC N690 1994-s1 | Specification of the Design, Fabrication and Erection of Steel Safety-Related Structures for Nuclear Facilities and Supplement No. 1 |
| AISC N690 1984 | Specification of the Design, Fabrication and Erection of Steel Safety-Related Structures for Nuclear Facilities |