STAAD.Pro Help

A. To create a load list

To create an active list of load cases for use with subsequent print and design commands, use the following procedure.

A load list is used to control the loads that are included with following print and design specifications.
Note: All load cases are considered by analysis commands. You just a CHANGE command to make changes to the loads considered for analysis.
  1. On the Analysis and Design ribbon tab, select the Load List tool in the Analysis Data group.

    The Load List dialog opens.
  2. Either:

    select one or more items in the Load Cases list and then click [>] to include them in the Load List


    click [>>] in include all load cases

    Tip: Including all load cases is the same as not using a load list at all.
  3. Click OK.