# V. AISC LRFD - Wide Flange Compression Capacity 2

To determine the capacity of W14X132 column in axial compression. The column is braced at its ends for its major axis, and at ends and mid-height for the minor axis.

## Reference

Hand calculation using the following reference:

AISC Load Factor Resistance Design, 3rd Edition, Example 4.1, case (b), page 4-7.

## Problem

 Fy =50 ksi

 Length = 30 ft

## Comparison

The reported STAAD.Pro value is based on the term PNC in the STAAD.Pro output..

Table 1. Comparison of results
Design strength (kips) 1,300 1,296.75 none

The file C:\Users\Public\Public Documents\STAAD.Pro CONNECT Edition\Samples\ Verification Models\09 Steel Design\US\AISC\AISC LRFD - Wide Flange Compression Capacity 2.STD is typically installed with the program.

STAAD SPACE AXIAL COMPRESSION CAPACITY PER AISC LRFD 3RD ED
START JOB INFORMATION
ENGINEER DATE 23-Sep-18
END JOB INFORMATION
*
*  EXAMPLE PROBLEM 4.1, CASE (B), PAGE 4-7, AISC LRFD 3RD ED.
*  CAPACITY (PNC) SHOULD BE ABOUT 1300 KIPS
*
UNIT FEET KIP
JOINT COORDINATES
1 0 0 0; 2 0 30 0;
MEMBER INCIDENCES
1 1 2;
MEMBER PROPERTY AMERICAN
1 TABLE ST W14X132
UNIT INCHES KIP
DEFINE MATERIAL START
ISOTROPIC MATERIAL1
E 29000
POISSON 0.3
END DEFINE MATERIAL
UNIT FEET KIP
CONSTANTS
MATERIAL MATERIAL1 ALL
SUPPORTS
1 PINNED
2 FIXED BUT FY MX MZ
2 FY -840
PERFORM ANALYSIS
UNIT INCHES KIP
PARAMETER 1
CODE LRFD
FYLD 50 ALL
LY 15 ALL
TRACK 1 ALL
CHECK CODE ALL
FINISH

STAAD.Pro CODE CHECKING - (LRFD 3RD EDITION)   v1.0
***********************
ALL UNITS ARE - KIP  INCH (UNLESS OTHERWISE Noted)